With the rapid development of petrochemical, equipment manufacturing, automobile industry and other industries, higher and newer requirements are put forward for steel wire braided rubber hoses. As the key equipment in the production of high-pressure rubber hose, steel wire braiding machine has a direct impact on the production of rubber hose. At present, the knitting machine used in the market is a special form of the traditional "Maypole" high-speed steel wire knitting machine.

The pay-off mechanism of the traditional steel wire plier overcomes the spring tension between the positioning pin installed on the swing rod and the positioning pin installed on the fixed plate of the frame by pulling the pay-off steel wire mechanism through the winding steel wire mechanism, so that the swing rod rotates upward around the rotating shaft at its end, and after reaching the predetermined tension of the pay-off steel wire at a predetermined angle, the received signal is transmitted to the PRC through the position sensor installed at the rear end of the swing rod, and after the signal processing, the PRC releases the brake of the electromagnetic drive, and the wire wheel pays off.

Steel wire winding machine is a kind of winding equipment mainly used for reinforcing layer of high-pressure rubber hose. It is used to wrap the steel wire around the inner rubber layer of the rubber hose as the skeleton of the rubber hose to bear the pressure generated by the internal oil in the use process of the rubber hose; Especially, the high-speed steel wire winding machine, which has just been put into the market in recent years, has the advantages of fast online speed and simple operation. The finished products can be applied to the transportation of high-pressure liquid in the field of construction machinery, railway and aviation. The wire splitter is a device used to split the wire on the high-speed steel wire winding machine with twisted and laid wire.